HP StorageWorks P9000 Manual page 258

Table 66 Details of Error Codes EBxx (continued)
Error Error Details
Code
A delta resync pair cannot be
EBC6
made because the S-VOL of the
specified copy pair is used by
another program product (BC
Z/FlashCopy).
A Cnt Ac-J Z copy pair cannot be
EBCE
resynchronized (with the
DELTAJNL parameter) because
the specified S-VOL has old
differential information. Execute
the Cnt Ac-J Z copy pair
resynchronization (with the
ALLJNL parameter).
The remote command cannot be
EBD0
executed because the path
between the specified storage
system or CU (SSID) and the
command target storage system
is not set, or because an error has
occurred on the path.
The path for the remote command
EBD3
transfer route for the second site
onwards, or for the command
device, might not be set, or a
failure occurred in the remote
command transfer route. Make
sure that the path and the
command device are set,
available, and have not failed,
and then re-execute the operation.
A Cnt Ac-J Z copy pair cannot be
EBD9
made because the charging limit
of Cnt Ac-S Z in the RCU has
been exceeded. Check the license
capacity of this and all related
program products.
A Cnt Ac-J Z copy pair cannot be
EBDA
made because the charging limit
of TCA in the RCU has been
exceeded. Check the license
capacity of this and all related
program products.
A Cnt Ac-J Z copy pair cannot be
EBDB
made because the charging limit
of Cnt Ac-J Z in the RCU has been
exceeded. Check the license
capacity of this and all related
program products.
A Cnt Ac-J Z copy pair cannot be
EBE0
made because the specified
S-VOL is part of a delta resync
Cnt Ac-J Z copy pair.
258 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
PATH Others
Output
Output