HP StorageWorks P9000 Manual page 103

Table 26 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKW0x) (continued)
Message ID
YKW003E TSO
YKW006E TSO
YKW007E TSO
YKW008E TSO
YKW009W TSO
Message Text
Unexpected transition of group
copy-group pair index device
xxxx to state state.
YKLOAD error return code =
nnnn
YKQUERY error return code =
nnnn.
YKCONMSG error return code
= nnnn
Terminated due to Operator
attention.
Explanation and Recommended Actions
One or more copy pairs identified by index within the
specified copy group copy group entered a status
identified by state that does not lead to the requested
GOTO status. It is probable that this status transition was
triggered manually.
Conduct an investigation using the ISPF panel
interface's monitor function.
The YKWATCH command uses the YKLOAD command
to obtain the copy group configuration. An error
occurred during execution of the YKLOAD command.
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of YKLOAD command
For details, see the description for
the YKLOAD command in the HP
StorageWorks P9000 for Business
Continuity Manager Software
Reference Guide.
The YKWATCH command uses the YKQUERY command
to establish the copy group status start baseline. An
error occurred during execution of the YKQUERY
command.
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of the YKQUERY
command
For details, see the description for
the YKQUERY command in the HP
StorageWorks P9000 for Business
Continuity Manager Software
Reference Guide.
The YKWATCH command uses the YKCONMSG command
to monitor the console message traffic of IEA494I
copy status messages. An error occurred during
execution of the YKCONMSG command.
nnnn
Return code of the YKCONMSG
command
For details, see the description for
the YKCONMSG command in the HP
StorageWorks P9000 for Business
Continuity Manager Software
Reference Guide.
An interrupt occurred during execution of the YKWATCH
command. The TSO/E command issued within the
YKWATCH command cannot be completed.
Re-execute the command.
List of Messages 103