HP StorageWorks P9000 Manual page 13

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID Message Text
YK8046I PRT CON time Execute operator
command 'opcmd'.
YK8047I PRT CON time Set MONITOR=-status
for Copy Group 'cgid'.
YK8048I PRT CON time Set CYCLETIME to :
cycletime.
YK8049I PRT CON time Set WAITTIMEOUT to :
timeout.
YK8050I PRT CON time Set MSGLEVEL to :
MSGLEVEL=lvllog,lvlcons.
YK8054I PRT CON time BCM Monitor resume
monitoring.
Explanation and Recommended Actions
BCM Monitor will execute the operator command identified by
opcmd.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor set the monitoring status of the copy group cgid to
the status status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
status
START: The monitoring status of the copy group was set to
ACTIVE.
STOP: The monitoring status of the copy group was set to
INACTIVE.
BCM Monitor set CYCLETIME to the value identified by cycletime.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor set WAITTIMEOUT to the value identified by timeout.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor set MSGLEVEL to the values identified by lvllog and
lvlcons.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
lvllog
Level of messages to be output to SYSTSPRT
lvlcons
Level of messages to be output to the console
BCM Monitor resumed processing.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
List of Messages 13