HP StorageWorks P9000 Manual page 38

Table 5 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKE0x)
Message ID
YKE000T TSO
RC=48
YKE001E MSG
SC=48 RC=48
YKE001E TSO
RC=48
YKE001E MSG
SC=48 RC=48
YKE001E MSG
SC=48 RC=48
YKE001W MSG
SC=4 RC=4
YKE002E MSG
SC=48 RC=48
YKE002E MSG
SC=48
YKE002E TSO
RC=48
YKE002E MSG
SC=48 RC=48
YKE003E MSG
SC=48 RC=48
38 Messages
Message Text
Supplied parameters invalid
GOTO() not supplied
No message MSG() supplied
No results STEM() supplied
TIMEOUT() not supplied
Timeout limit has expired,
waiting for group
copy-group to reach state
state.
Copy Group STEM(stem)
does not include trailing "."
DEVN() value invalid
Messages MSG(stem) does
not include trailing "."
TIMEOUT() value invalid
GOTO value is invalid.
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKE099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the GOTO parameter.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
Nothing is assigned to the TIMEOUT parameter.
Processing is terminating because the timeout limit has expired.
Correct the timeout value or check that the status to be monitored
is correctly specified. Use the YKQUERY command to check the
status of the copy pairs. If there is a copy pair where a transition
has not taken place, the S-VOL of that copy pair might be ONLINE.
Make it OFFLINE and re-execute.
copy-group
Copy group ID
state
Status to be monitored
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
The value assigned to the TIMEOUT parameter is invalid.
The value assigned to the GOTO parameter is invalid.
For the GOTO parameter, specify the DUPLEX, SUSPEND, SIMPLEX,
SUSPVS, HOLD, or SWAPPING option.