HP StorageWorks P9000 Manual page 212

Table 55 Details of Error Codes 50xx – 6Axx (continued)
Error Error Details
Code
The command device cannot be
64FB
defined. The reason might be one
of the following:
The corresponding volume is not
installed.
The corresponding volume is a
system residence volume.
The corresponding volume is
online.
The corresponding volume is
being used by another program
product such as BC Z, Cnt Ac-S
Z, TCA, Cnt Ac-J Z or
FlashCopy.
A command device cannot be
64FC
redefined because the APID that
was already defined does not
match the APID you attempted to
define.
The command device cannot be
64FD
defined because a command
device with the same APID has
been defined for another device.
A command device cannot be
64FF
defined because the APID specified
by the parameter does not match
the APID defined for the command
device.
The host command parameter is
69E4
invalid.
A path cannot be deleted because
69E6
there is an invalid parameter.
The command cannot be executed
69E7
because the specified volume is not
installed.
The command cannot be executed
69E8
because the specified volume is
blocked.
The command cannot be executed.
69E9
The reason might be one of the
following:
The corresponding volume is in
the SIMPLEX status.
The corresponding volume is not
part of a TCA copy pair.
The corresponding volume is not
a P-VOL.
212 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output Output
Cnt Ac-J Z CMD PATH
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output
Not output
Others
Output
Not
output
Output
Output