Yk8413I Prt; User Completion Codes - HP StorageWorks P9000 Manual

CYCLE TIME : <cycletime>
WAITFOR TIMEOUT : <timeout>
ONACTIONERROR : <err-action>
STOP AT STOPPOINT : <stoppt>
SLEEP AT STOPPOINT : <sleeppt>
The values specified in the YKMONOPT file are displayed.
<cycletime>: Cycle time
<timeout>: Timeout value
<lvllog>: Level of messages to be output to SYSTSPRT
<lvlcons>: Level of messages to be output to the console
<err-action>: Error action to be executed
<stoppt>: Stop point
<sleeppt>: Sleep point

YK8413I PRT

COPY GROUP DEFINITIONS:
PREFIX : <prefix>
DAD-ID : <dad>
ROUTE LIST : <route>
MONITOR STATUS : <cgmonstat>
STARTUP STATUS : <cgsastat>,<cgsaact>,<cgsaopt>
[ WHEN STATUS <status> DO ACTION '<action><err-action>'
The values specified in the YKMONCG file are displayed. This message appears a number of
times, equal to the number of copy groups specified.
<cgid>: Copy group ID
<prefix>: Prefix
<dad>: Copy group host device address domain ID
<route>: Route list ID
<cgmonstat>: Copy group monitoring status (ACTIVE or INACTIVE)
<cgsastat>: Copy group startup status to be checked for starting BCM Monitor
<cgsaact>: Startup action executed if the copy pair status for starting BCM Monitor is different
from the specified startup status
<cgsaopt>: Option information of the CGSTARTUPSTATUS parameter
<status> <action><err-action>: Status, action, and error action for the copy group
specified in STATUS and ACTION. These parameters appear a specified number of times.

User Completion Codes

Table 46 (page 188)
MSGLEVEL : <lvllog>, <lvlcons>
ID : <cgid>
provides details about the user completion codes.
User Completion Codes 187