HP StorageWorks P9000 Manual page 156

Table 40 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ27x)
Message ID
YKZ270E MSG SC=36
RC=36 (index1, index2)
YKZ271E MSG SC=12
RC=12
YKZ272W MSG SC=8
RC=8
156 Messages
Message Text
Duplicate logical paths exist.
Definition of xxxxxxxx does not
match the actual configuration.
DEVN device#(SN,CU#,CCA#)
Variables were changed for the
number of paths or portID.
Explanation and Recommended Actions
The logical path definitions for index1 and index2
are duplicated.
Delete one of these definitions or make sure that the
duplicated logical path definitions are correct, and
then re-execute the command.
index1
The index number of one
duplicated logical path
index2
The index number of the other
duplicated logical path
The group definition does not match the actual pair
configuration. If GROUPID is displayed for unmatched
items or * is displayed on the device number, storage
system serial number, CU number, or CCA number,
there is a copy pair which is not defined in the copy
group definition parameter, and which belongs to
the same C/T group in the same CU as the P-VOL
or S-VOL.
Check and correct the values of the copy group
definition parameters and re-execute the command.
xxxxxxxx
Items that do not match
COPYTYPE: copy type
GROUPID: consistency group ID,
or Open/MF Consistency attribute
PAIR: copy pair configuration
device#
Device number
If the device cannot be identified,
**** is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified,
** is displayed.
CCA#
Command control address number
If the device cannot be identified,
** is displayed.
For the port numbers and number of physical paths,
update the REXX variable, which indicates the port
numbers and number of physical paths, to match the
settings on the storage system.