HP StorageWorks P9000 Manual page 254

Table 66 Details of Error Codes EBxx (continued)
Error Error Details
Code
When making a copy pair using
EB38
the same journal group number
and mirror ID as an existing copy
pair, you cannot specify a
secondary storage system that
differs from the secondarystorage
system of the existing copy pair.
Therefore, a Cnt Ac-J Z copy pair
cannot be made.
This error occurs if there is more
than one secondary storage
system in the same copy group or
when the specified journal group
number and mirror ID are used
for another copy group.
The batch pair status command
EB3B
cannot be executed because the
CU number specified by the
YKEWAIT command or YKRSCAN
command is not supported by this
model.
A Cnt Ac-J Z copy pair status
EB3C
cannot be changed because the
specified serial number or SSID
of the primary storage system
does not match the actual serial
number or SSID of the primary
storage system.
A Cnt Ac-J Z copy pair status
EB3D
cannot be changed because the
specified serial number or SSID
of the secondary storage system
does not match the actual serial
number or SSID of the secondary
storage system.
A delta resync pair cannot be
EB48
made. The reason might be one
of the following:
The P-VOL of a Cnt Ac-S Z
copy pair and another P-VOL
of a Cnt Ac-J Z copy pair do
not match.
The storage system serial
number on the copy source is
incorrect.
A delta resync pair cannot be
EB49
made because the delta resync
function is not supported in the
RCU.
A Cnt Ac-J Z copy pair cannot be
EB4C
made because the specified R-JNL
group is not registered.
254 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
PATH Others
Output Not
output