HP StorageWorks P9000 Manual page 58

Business continuity manager software messages
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x) (continued)
Message ID
YKJ207W TSO
RC=8
YKJ208W TSO
RC=8
YKJ209E TSO
RC=32
YKJ210E TSO
RC=32
58
Messages
Message Text
Inconsistencies exist among
the values used to specify
the primary volume:
dd-name: rec#
Inconsistencies exist among
the values used to specify
the secondary volume:
dd-name: rec#
Subconsistency group ID
cannot be specified for a
copy-type Copy Group:
dd-name: rec#
The value specified for
Number-of-Pairs exceeds the
range in which volumes
exist: Number-Of-Pairs:
dd-name: rec#
Explanation and Recommended Actions
The P-VOL specified with the device number differs from the P-VOL
specified with the storage system serial number, CU number, and
command control address number.
Although the copy group definition file was created, the settings
therein might contain an error.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
The S-VOL specified with the device number differs from the S-VOL
specified with the storage system serial number, CU number, and
command control address number.
Although the copy group definition file was created, the settings
therein might contain an error.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
A subconsistency group ID is specified for a copy group of the copy
type identified by copy-type. No subconsistency group ID can be
specified if the copy type is Hitachi ShadowImage™ for Mainframe,
Hitachi TrueCopy™ for Mainframe, or Hitachi TrueCopy™
Asynchronous for Mainframe.
copy-type
Copy type
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
No volume exists in the range of the Number-Of-Pairs repetitions.
Number-Of-Pairs
Number of pair repetitions
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500

Table of Contents