HP StorageWorks P9000 Manual page 86

Business continuity manager software messages
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 16 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKP0x) (continued)
Message ID
YKP003E MSG SC=48
RC=48
YKP010E TSO RC=40
YKP065E MSG SC=36
RC=36
YKP099I TSO
Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x)
Message ID
YKQ000T TSO RC=48
YKQ001E TSO RC=48
YKQ001E MSG
SC=48 RC=48
YKQ002E MSG
SC=48 RC=48
YKQ002E MSG
SC=48
YKQ002E TSO RC=48
86
Messages
Message Text
Some storage systems in this
Copy Group do not support
TCA statistics reports
REXX failure return code=nnnn
starting with variable name
The storage system
(serial-number) pairs with more
than 4 storage systems.
YKSTATS command return
code=nnnn, reason code=rrrr
Message Text
Supplied parameters invalid
No message MSG() supplied
No results STEM() supplied
Copy Group STEM(stem) does
not include trailing "."
DEVN() value invalid
Messages MSG(stem) does not
include trailing "."
Explanation and Recommended Actions
The TCA copy group on which the YKSTATS command has
been executed contains an unsupported IFType.
Check that the command can be executed on this copy group,
and then re-execute the command.
Access to the REXX variable indicated by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code for REXX access
The storage system identified by serial-number is paired with
more than four storage systems within the C/T group.
Correct the copy pair configuration within the C/T group.
serial-number
storage system serial number (12 digits)
The YKSTATS command terminated with the return code nnnn
and the reason code rrrr.
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKQ099I message
that will appear after this message. For reason codes, see
IKJPARS in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM
parameter
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG
parameter

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500

Table of Contents