HP StorageWorks P9000 Manual page 138

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Message ID
YKZ220T MSG SC=36
#
RC=36
YKZ220T MSG SC=36
RC=44
YKZ222E MSG SC=36
#
RC=36 (pair-index)
YKZ224E MSG SC=8
#
RC=36 (pair-index)
138 Messages
Message Text
Number of pair-groups value null or
invalid.
Number of Route dad-id is invalid.
volume DEVN device-number invalid
Primary device does not support TCA
Explanation and Recommended Actions
The number of copy pairs contained in the copy
group structure is NULL or invalid. Correct the
configuration file, and then re-execute the YKLOAD
command.
value
REXX variable value
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
The number of routes related to dad-id is invalid.
Check whether the device address domain ID
specified in the YKLOAD command is invalid or
correct the configuration file, and then re-execute the
YKLOAD command.
dad-id
Device address domain ID
The device number of the volume is invalid.
If the volume is not connected to the host in use,
check the values of the DAD and ROUTE parameters
specified in the YKLOAD command and the contents
of the route list definition file.
volume
If volume is Primary: P-VOL.
If volume is Secondary: S-VOL.
device-number
Device number
pair-index
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
TCA cannot be used on a storage system with a
P-VOL.
Use a device that supports TCA.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.