HP StorageWorks P9000 Manual page 84

Table 14 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM9x) (continued)
Message ID
YKM903E TSO
YKM904E TSO
YKM905E TSO
YKM906E TSO
Table 15 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKN0x)
Message ID
YKN000T TSO
RC=48
YKN001E TSO
RC=48
YKN001E MSG
SC=48 RC=48
YKN002E MSG
SC=48 RC=48
YKN002E TSO
RC=48
84 Messages
Message Text
SELECT service terminated
abnormally. RC=nn
Message library was not
found.
A GETMAIN error occurred.
A FREEMAIN error occurred.
Message Text
Supplied parameters invalid
No message MSG() supplied
No results STEM() supplied
Copy Group STEM(stem) does
not include trailing "."
Messages MSG(stem) does not
include trailing "."
Explanation and Recommended Actions
The SELECT service terminated abnormally with the return code
nn.
If this message is displayed immediately after executing the
YKSTART command, the Business Continuity Manager dataset
might not be concatenated to the panel library (dd name:
ISPPLIB), the table library (dd name: ISPTLIB), or the REXX exec
library (dd name: SYSEXEC).
If DBCS (Double-Byte Character Set) is enabled for the
environment, concatenate the Business Continuity Manager
dataset to the alternate panel library (dd name: ISPPALT). For
details, see the HP StorageWorks P9000 for Business
Continuity Manager Software Installation Guide.
nn
Return code of the service
The message library was not found.
The Business Continuity Manager dataset might not be
concatenated to the message library (dd name: ISPMLIB).
If DBCS (Double-Byte Character Set) is enabled for the
environment, concatenate the Business Continuity Manager
dataset to the alternate message library (dd name: ISPMALT).
For details, see the HP StorageWorks P9000 for Business
Continuity Manager Software Installation Guide.
A GETMAIN error occurred. The program will stop running.
Contact technical support for assistance.
A FREEMAIN error occurred. However, the program will
continue to run.
Contact technical support for assistance.
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKN099I message that
will appear after this message. For reason codes, see IKJPARS
in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter