HP StorageWorks P9000 Manual page 80

Table 12 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM1x – YKM5x) (continued)
Message ID
YKM519E ISPF
YKM520E ISPF
YKM521E ISPF
YKM522E ISPF
YKM523E ISPF
YKM524E ISPF
YKM525E ISPF
YKM526E ISPF
YKM527E ISPF
YKM528E ISPF
Table 13 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM7x)
Message ID
YKM700E ISPF
YKM701E ISPF
YKM702E ISPF
80 Messages
Message Text
You cannot insert a remote
route entry, either because the
specified DAD ID is the same
as the local DAD ID or Non
Gen'ed DAD ID, or because
the DAD ID has already been
used to scan the storage
system.
These device number remdevn
or storage system S/N remsn
are not discovered on Device
Address Domain remdad.
You cannot exit this panel until
you define a command device.
Please supply the required
information.
You cannot enter values to both
License Key Dataset Name
field and Key Code field at the
same time.
Please enter alphanumeric
characters to Key Code field.
Invalid Key Code is entered.
Please re-enter the Key Code.
Invalid dataset name is
specified.
You cannot specify the license
information dataset.
Enter the value that you want
to find with the LOCATE
command on a sorted field.
Message Text
Enter one of the listed values.
Enter required field at the
cursor position.
The length of the data must be
= crtlen.
Explanation and Recommended Actions
A remote route entry cannot be inserted because the specified
device address domain ID is the same as the local device
address domain ID, a Non Gen'ed device address domain ID,
or the device address domain ID of the storage system that is
already scanned.
The device number or storage system serial number has not yet
been scanned in the device address domain ID.
remdevn
The device number you specified
remsn
The storage system serial number you
specified
remdad
The device address domain ID you specified
The exit operation cannot be performed until you define a
command device.
Enter the necessary information.
The License Key Dataset Name and Key Code fields cannot be
specified simultaneously.
The value specified in the Key Code field contains characters
that are not numbers or letters.
The key code is incorrect. Re-enter the key code.
An incorrect dataset name is specified.
The license information dataset cannot be specified.
Enter the value that you want to find in the sorted field by using
the LOCATE command.
Explanation and Recommended Actions
Enter one of the listed values.
Enter the required information at the cursor position.
The length of the input data must be crtlen.
crtlen
Necessary data length