HP StorageWorks P9000 Manual page 70

Table 10 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL2x) (continued)
Message ID
YKL254E MSG
SC=36 RC=36
(file:rec#)
YKL262E MSG
SC=36 RC=36
YKL271E MSG
SC=36 RC=36
(file:rec#)
YKL273E MSG
SC=36 RC=36
(file:rec#)
70 Messages
Message Text
The value value of attribute
name is not match with
filename.
name is not specified or
invalid.
The element name is required,
but no element was found.
The element statements are
invalid.
Explanation and Recommended Actions
The value value of the XML attribute name does not match the
name in the file name.
Correct the specification on the line with the line number identified
by rec# in the file identified by file, or correct the file name.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The system symbol identified by name has not been defined or
has been assigned an invalid value.
If name is YKCMDIF:
The host ID that identifies the host on which Business Continuity
Manager is running is invalid or missing. Define YKCMDIF
correctly.
For details on the host ID definition (YKCMDIF), see the HP
StorageWorks P9000 for Business Continuity Manager Software
Installation Guide.
The required XML element name is missing.
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The XML element description is invalid.
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected