HP StorageWorks P9000 Manual page 57

Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x) (continued)
Message ID Message Text
YKJ202I TSO RC=4 No copy pair is defined in
specified Pair information
CSV file.
YKJ203E TSO The number of items
RC=32 specified for a line in Pair
information CSV file is
invalid: dd-name: rec#
YKJ204E TSO Primary volume is not
RC=32 specified in Pair information
CSV file: dd-name: rec#
YKJ205E TSO Secondary volume is not
RC=32 specified in Pair information
CSV file: dd-name: rec#
YKJ206E TSO The specified volume does
RC=32 not exist in the disk
configuration definition file:
dd-name: rec#: device
Explanation and Recommended Actions
No copy pair is defined in the pair information CSV file. No data
was written in the copy group definition file.
The number of items specified on one line of the pair information
CSV file is incorrect.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
No P-VOL is specified in the pair information CSV file.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
No S-VOL is specified in the pair information CSV file.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
The specified volume does not exist in the disk configuration
definition file.
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected device
One of the following is displayed. If both are specified, the device
number is displayed.
Device number
Storage system serial number, CU number, and command control
address number
The display format is
storage-system-serial-number:CU-number:CCA-number.
List of Messages 57