HP StorageWorks P9000 Manual page 37

Table 4 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKD0x)
Message ID Message Text
YKD000T TSO Supplied parameters invalid
RC=48
YKD001E TSO No message MSG() supplied
RC=48
YKD001E MSG No results STEM() supplied
SC=48 RC=48
YKD002E MSG Copy Group STEM(stem)
SC=48 RC=48 does not include trailing "."
YKD002E MSG DEVN() value invalid
SC=48
YKD002E TSO Messages MSG(stem) does
RC=48 not include trailing "."
YKD008E MSG DEVN() not valid hex
SC=48
YKD010E TSO REXX failure return
RC=40 code=nnnn starting with
variable name
YKD050E MSG Invalid Copy Group attribute
SC=36 RC=48 name
(attribute-value)
YKD058E MSG Some pairs in this group do
SC=36 RC=48 not support Hitachi
TrueCopy™ Asynchronous
for Mainframe (TCA)
services.
YKD099I TSO YKDELETE command return
code=nnnn, reason
code=rrrr
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKD099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
The value specified in the DEVN parameter is not in hexadecimal
format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
The specified copy group attribute value is invalid for this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
One or more devices in the HP XP 256 Disk Array storage system
do not support TCA copy groups.
Check that the command can be executed on this copy group, and
then re-execute the command.
The YKDELETE command terminated with the return code nnnn
and the reason code rrrr.
This message is always displayed to indicate the return code and
the reason code.
nnnn
Maximum among the severity codes returned
during command execution
List of Messages 37