HP StorageWorks P9000 Manual page 257

Table 66 Details of Error Codes EBxx (continued)
Error Error Details
Code
A Cnt Ac-J Z copy pair cannot be
EB7F
made because the emulation type
of the specified S-VOL is not
supported.
A Cnt Ac-J Z copy pair cannot be
EB87
made. The reason might be one
of the following:
The path from the secondary
storage system to the primary
storage system is not set.
The S-VOL is in the SIMPLEX
status.
A Cnt Ac-J Z copy pair could not
EB88
be made because of one the
following reasons:
The specified S-VOL is already
being used as the S-VOL of a
BC Z copy pair.
The specified volume is in Not
Ready status.
The LDEV guard (PROTECT) is
set for the S-VOL.
A Cnt Ac-J Z copy pair cannot be
EB89
made because the emulation
types of the specified P-VOL and
S-VOL do not match.
A Cnt Ac-J Z copy pair cannot be
EB8A
made because the emulation
types of the specified M-JNL
group and R-JNL group do not
match.
A Cnt Ac-J Z copy pair status
EB94
cannot be changed because the
status of the specified copy pair
does not allow the status
transition.
A Cnt Ac-J Z copy pair status
EBA0
cannot be changed because the
specified S-VOL is not installed.
The command could not be
EBA8
executed because the remote
command has been issued to a
volume that is not installed.
The remote command cannot be
EBB3
executed because the command
device has not been defined.
The command could not be
EBBD
executed because the command
device is under LDEV guard.
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output
Output
Details of Error Codes 257
PATH Others
Not output
Not output