HP StorageWorks P9000 Manual page 237

Table 62 Details of Error Codes C3xx (continued)
Error Error Details
Code
The specified volume within the
C30D
RCU, or another volume which
belongs to the same group is in
transition to a SIMPLEX or suspend
status. Try the operation again in
a few minutes.
The MCU is not NVS ON.
C310
The subsystem level cache of the
C311
MCU is not valid.
The P-VOL is not in the SIMPLEX
C312
status.
The P-VOL is not in the suspend
C313
status.
The P-VOL is not in the SIMPLEX
C314
status.
The P-VOL has PIN data.
C315
The drive copy is being performed
C316
on the P-VOL (troubleshooting).
The drive copy is being performed
C317
on the P-VOL (SVP request).
The copy task ending process is
C318
being performed on the P-VOL.
The collection copy is being
C319
performed on the P-VOL.
The P-VOL is in a collection access
C31A
status.
The logical volume of the P-VOL is
C31B
blocked (PDEV blocking factor).
The P-VOL cannot be accessed
C31C
(because the LDEV is blocked or in
the NOT READY status).
Formatting of the logical volume is
C31D
being performed on the P-VOL.
The P-VOL is in the READ ONLY
C31E
status.
The logical path between the MCU
C320
and the RCU is not set (number of
path = 0).
The condition setting for the number
C321
of the Minimum Path between the
MCU and the RCU is invalid.
The MCU is a storage system type
C322
that is not supported by Cnt Ac-S
Z or TCA.
Type of Error
BC Z Cnt Ac-S Z
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
PATH Others
Details of Error Codes 237