HP StorageWorks P9000 Manual page 234

Table 60 Details of Error Codes C1xx (continued)
Error Error Details
Code
The command could not be
C12C
executed because automatic port
switching cannot be performed for
the specified path.
The command could not be
C12D
executed because the
device-identifying code of an RCU
for which path registration is
specified is invalid, or because the
RCU type (FIBRE/ESCON) is
invalid.
The command could not be
C12E
executed because all CU numbers
of an RCU for which path creation
or deletion is specified are not the
same.
The command cannot be executed.
C12F
The reason might be one of the
following:
The specified CU number is not
defined.
An LDEV is not defined for the
specified CU number.
A copy pair cannot be
C162
resynchronized because the
corresponding bootup pair is not
in the suspend status.
A copy pair cannot be dissolved
C184
because an attempt to change the
S-VOL status failed.
A Cnt Ac-S Z or TCA copy pair
C189
cannot be dissolved because the
copy pair status is invalid.
The copy pair cannot be dissolved.
C18A
The reason might be one of the
following:
The status of the bootup volume
is being changed.
There is a copy pair in the
group that has a status that is
being changed.
A copy pair cannot be suspended
C194
because the S-VOL status is being
changed.
A copy pair cannot be suspended
C195
because the specified copy pair is
already in the suspend status.
The command cannot be executed
C198
because there is no copy pair that
can be suspended in the group.
234 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
Not output
Not output
Not output
PATH Others
Output Not
output
Output Not
output
Output Not
output
Output Not
output