HP StorageWorks P9000 Manual page 208

Table 54 Details of Error Codes 4Bxx
Error Error Details
Code
A copy pair cannot be
4B02
resynchronized because the copy
pair is in a status that cannot be
changed. The reason might be one
of the following:
The copy pair cannot be
resynchronized because the copy
group definition contains a C/T
group ID, but the actual copy
group does not.
A resynchronization cannot be
performed if it changes a copy
group that has a C/T group ID
but does not have an Open/MF
Consistency attribute to a copy
group without a C/T group ID.
A resynchronization cannot be
performed if it changes a copy
group without a C/T group ID to
a copy group that has a C/T
group ID but does not have an
Open/MF Consistency attribute.
The copy pair is in the SIMPLEX
status.
A copy pair that is in a Cnt Ac-S Z
4B03
copy group with a C/T group ID
specified cannot be resynchronized
because the C/T group IDs do not
match.
A Cnt Ac-S Z or TCA copy pair
4B04
cannot be made because the P-VOL
is a command device.
A copy pair that is in a Cnt Ac-S Z
4B06
copy group with a C/T group ID
specified cannot be suspended
because the copy pair status does
not allow the status to be changed.
The reason might be one of the
following:
The specified volume is not in a
Cnt Ac-S Z copy group with a
C/T group ID specified.
The Open/MF Consistency
attribute for the specified volume
is different from the copy group
definition information.
The copy pair is in the SIMPLEX
status.
A copy pair that is in a Cnt Ac-S Z
4B07
copy group with a C/T group ID
specified cannot be suspended
because the C/T group IDs do not
match.
208 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not Output Not output
output
Not Output Not output
output
Not Output
output
Not Output Not output
output
Not Output Not output
output
Cnt Ac-J Z CMD PATH
Not output
Others