HP StorageWorks P9000 Manual page 196

Table 48 Details of Error Codes 23xx (continued)
Error Error Details
Code
The command could not be executed
23F3
because the specified ATTIME
suspend time is in the past.
The command used to request that the
23F4
ATTIME suspend time information be
acquired could not be executed due
to the following reasons:
The command was issued to the
P-VOL.
The status of the copy pair is
SIMPLEX.
Make sure that the command is
properly issued and the copy group
definition file has been correctly
configured.
The command could not be executed
23F5
because the ATTIME suspend time is
already set. To change the
configuration of the copy group
definition file, first cancel ATTIME
suspension.
A BC Z copy pair status cannot be
23FF
changed because the specified BC Z
copy pair status does not allow the
status to be changed.
Table 49 Details of Error Codes 36xx
Error Error Details
Code
Registration to EXCTG has failed
3613
because the specified arbitration
command device is not an
arbitration command device.
Registration to EXCTG has failed.
3614
The reason might be one of the
following:
The specified arbitration
command device is not defined.
The specified arbitration
command device is blocked.
Registration to EXCTG has failed
3616
because the journal group to be
registered is also subject to deletion
from EXCTG.
Registration to EXCTG has failed
3617
because the status is currently being
changed.
Registration to EXCTG has failed
3618
because M-JNL groups and R-JNL
groups co-exist within the EXCTG.
196 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Type of Error
BC Z Cnt Ac-S Z TCA
Not output
Not output
Not output
Not output
Not output
Cnt Ac-J Z CMD PATH
Cnt Ac-J Z CMD PATH
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Others
Others