HP StorageWorks P9000 Manual page 19

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID Message Text
YK8230E PRT CON time REPORT type is only
valid for TCA or CAJ Copy
Groups.
YK8231E PRT CON time BCM Monitor can not
adjust Copy Group status.
YK8300I PRT CON time sendmsg
YK8301I PRT CON time Not all volumes are in
'status'. action requested.
YK8302I PRT CON time Trying to cmd Copy
Group 'cgid'.
YK8303I PRT CON time Waiting for status
'status'.
Explanation and Recommended Actions
type, which was specified for the REPORT parameter, is only valid
for TCA or Cnt Ac-J Z copy groups.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
type
Report type
BCM Monitor could not set the copy group to the specified startup
status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
The message identified by sendmsg appears. The message is
specified in SENDMSG with the STATUS level designated.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
The action identified by action will be executed because there is a
volume that is not in the status identified by status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
The CLI command identified by cmd will be executed for the copy
group identified by cgid.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will wait until the copy group being monitored enters
the status identified by status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
List of Messages 19