HP StorageWorks P9000 Manual page 168

Table 43 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ3x) (continued)
Message ID
YKZ310I CON
YKZ31 1I CON
YKZ320E TSO
YKZ321E TSO
YKZ322E TSO
YKZ330E TSO RC=64
168 Messages
Message Text
hh:mm:ss command
hh:mm:ss command RC=rc
Supplied parameters invalid.
Time value is invalid.
Specify SEC and MIN parm
exclusively.
command detected the rexx-service
service error. (return code=r[, reason
code=n]).
Explanation and Recommended Actions
This log data indicates that a CLI command has been
issued.
hh:mm:ss
Time the CLI command was issued
(local time)
command
Issued CLI command name and
its parameters
A maximum of 109 characters
can be output. If 109 is
exceeded, the remainder are
discarded.
This log data indicates the result of a CLI command
execution.
hh:mm:ss
Time the CLI command was issued
(local time)
command
Issued CLI command name
rc
Return code for the CLI command
For details, see the command
descriptions in the HP
StorageWorks P9000 for Business
Continuity Manager Software
Reference Guide.
An error was detected during parameter analysis.
The specified time value is invalid.
The SEC and MIN parameters cannot be specified
at the same time.
An error was detected in the REXX service.
command
Issued CLI command name.
rexx-service
Name of the REXX service where
an error was detected.
r (decimal number)
Return code from the REXX
service.
For details, see the TSO/E REXX
User's Guide.
n (decimal number)
Reason code from the REXX
service.
For details, see the TSO/E REXX
User's Guide.