HP StorageWorks P9000 Manual page 153

Table 39 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ26x)
Message ID
YKZ260I MSG SC=0
RC=0
YKZ261E MSG CON
SC=0 RC=0
YKZ262E MSG CON
SC=0 RC=0
YKZ263E MSG CON
SC=0 RC=0
Message Text
The volume has already reached the
target status.
The YKLOGnn DD statement is not
specified. (cp=xxx:yyy)
A YKLOGnn open error occurred.
(rc=nnn, cp=xxx:yyy)
A YKLOGnn I/O error. (text,
cp=xxx:yyy)
Explanation and Recommended Actions
Processing of some volumes was skipped because a
volume that has already reached the target status
exists.
No DD statement is specified in YKLOG01 or
YKLOG02.
YKLOGnn
YKLOG01 or YKLOG02
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
An open error occurred in YKLOG01 or YKLOG02.
YKLOGnn
YKLOG01 or YKLOG02
nnn (decimal number)
Return code from the OPEN
macro
xxx (decimal number)
Command code of the command
that was executed when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
An I/O error occurred in YKLOG01 or YKLOG02.
YKLOGnn
YKLOG01 or YKLOG02
text
Message acquired by the
SYNADAF macro
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
List of Messages 153