HP StorageWorks P9000 Manual page 141

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Message ID
YKZ230W MSG SC=4
RC=4 (pair-index)
YKZ231E MSG SC=44
RC=44
YKZ232T MSG SC=36
RC=44
Message Text
Management for the relevant volume
was skipped. DEVN
device#(SN,CU#,CCA#)
Necessary Routelist or DEVN
information is not found.
Number of Copy Groups value
invalid.
Explanation and Recommended Actions
Processing for the volume was skipped because the
status of the volume did not allow this command to
be executed. If 0 is displayed in the location that
indicates the copy pair corresponding to the
pair-index, multiple volumes within the copy group
have been skipped.
Change the status of the copy pairs to a status that
allows this command to be executed.
device#
Device number
If the device cannot be identified,
**** is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified,
** is displayed.
CCA#
Command control address number
If the device cannot be identified,
** is displayed.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
The route list or device number information is missing
although it is required for processing to continue.
Correct the value assigned to the ROUTE or DAD
parameter passed to the YKLOAD command.
The number of copy groups is invalid.
Correct the content of the configuration file.
value
Number of copy groups
List of Messages 141