HP StorageWorks P9000 Manual page 134

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x)
Message ID
YKZ210E MSG TSO
CON SC=40 RC=44
YKZ21 1E MSG CON
#
SC=40 RC=44
134 Messages
Message Text
A NAME/TOKEN read error
#
occurred. (return code=nnn, name=
name, cmd=xxx, pos=yyy)
A NAME/TOKEN write error
occurred. (return code=nnn, name=
name, cmd=xxx, pos=yyy)
Explanation and Recommended Actions
The command cannot be executed because a
NAME/TOKEN read error occurred.
Check that the YKLOAD command terminated
normally.
nnn (decimal number)
Return code set by the
NAME/TOKEN read routine
(IEANTRT)
name (string)
Name registered in the
Name/Token service
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
#
If this message is output when the log and trace
are obtained, the RC is 0.
The command cannot be executed because a
NAME/TOKEN write error occurred.
nnn (decimal number)
Return code set by the
NAME/TOKEN registration routine
(IEANTCR)
name (string)
Name registered in the
Name/Token service
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
#
If this message is output when the log and trace
are obtained, the RC is 0.