HP StorageWorks P9000 Manual page 120

Table 33 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY6x) (continued)
Message ID
YKY606I CON
YKY680I SYS
120 Messages
Message Text
IRXTERM MODULE
ERROR,CODE=return-code,R0=
abnormal-termination-code-and-
reason-code-for-abnormal-
termination
hh:mm:ss task-ID,command,RC=
return-code[,text]
Explanation and Recommended Actions
The IRXTERM routine returned an error with the
indicated return code. The Business Continuity
Manager agent terminates the processing.
Check the return code.
return-code
For details about the return code,
see the TSO/E REXX Reference.
abnormal-termination-code-and-
reason-code-for-abnormal-termination
R0 includes the abnormal
termination code and the reason
code for abnormal termination.
IRXTERM returns the abnormal
termination code set in the two
trailing bytes of R0. IRXTERM
returns the reason code for
abnormal termination set in the two
leading bytes of R0. If the reason
code for abnormal termination is
larger than two bytes, IRXTERM
returns only the two trailing bytes
of the reason code for abnormal
termination. For details about the
abnormal termination code and
reason code, see the MVS System
Codes.
A command that was issued by the Business Continuity
Manager agent ended with return-code. Messages
for detected errors are output to text.
If the number of characters in the message output by
the command exceeds 126, it will be displayed on
multiple lines. The maximum number of message lines
for a single command is 10.
hh:mm:ss
Message output time (local time)
task-ID
Identification number of the
processing task to which the
message was output
command
Name of the command that the
Business Continuity Manager agent
executed
return-code
Return code from the command that
the Business Continuity Manager
agent executed
text
Message (maintenance information)
that was output by the command
that the Business Continuity
Manager agent executed