HP StorageWorks P9000 Manual page 102

Table 25 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKV0x) (continued)
Message ID
YKV002E MSG SC=48
YKV002E TSO RC=48
YKV008E MSG SC=48
YKV010E TSO RC=40
YKV050E MSG SC=36
RC=48 (attribute-value)
YKV058E MSG SC=36
RC=48
YKV099I TSO
Table 26 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKW0x)
Message ID
YKW001W TSO
YKW002E TSO
102 Messages
Message Text
DEVN() value invalid
Messages MSG(stem) does not
include trailing "."
DEVN() not valid hex
REXX failure return code=nnnn
starting with variable name
Invalid Copy Group attribute
name
Some pairs in this group do not
support TCA services.
YKRECVER command return
code=nnnn, reason code=rrrr
Message Text
Timeout limit has expired without
group copy-group reaching state
state.
Primary Devices OFFLINE. Unable
to receive IEA494I messages.
Explanation and Recommended Actions
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG
parameter
The value specified in the DEVN parameter is not in
hexadecimal format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The specified copy group attribute value is invalid for
this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
One or more devices in the HP XP 256 Disk Array
storage system do not support TCA copy groups.
Check that the command can be executed on this copy
group, and then re-execute the command.
The YKRECVER command terminated with the return
code nnnn and the reason code rrrr.
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Explanation and Recommended Actions
The specified copy group copy-group did not reach the
requested status state within the specified time limit.
Because the specified copy group contains a copy pair
whose P-VOL is offline, the IEA494I message is not
issued.
Make all P-VOLs within the specified copy group online,
and then re-execute the command.