HP StorageWorks P9000 Manual page 101

Table 24 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKU0x) (continued)
Message ID
YKU054E MSG SC=36
RC=48
YKU055E MSG SC=48
RC=48
YKU055E MSG SC=48
RC=48
YKU056E MSG SC=48
RC=48
YKU057E MSG SC=36
RC=48
YKU058E MSG SC=36
RC=48
YKU099I TSO
Table 25 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKV0x)
Message ID
YKV000T TSO RC=48
YKV001E TSO RC=48
YKV001E MSG SC=48
RC=48
YKV002E MSG SC=48
RC=48
Message Text
ATTIME parameter invalid for CA
Copy Group
Specify PURGE and DEVN
parameter exclusively for CAJ
Copy Group
Specify PURGE and VOLUNIT
parameter exclusively for CAJ
Copy Group
DRAIN parameter cannot be
specified for CAJ Copy Group
ATTIME and CANCEL parameters
are invalid for CAJ Copy Group
Some pairs in this group do not
support TCA services.
YKSUSPND command return
code=nnnn, reason code=rrrr
Message Text
Supplied parameters invalid
No message MSG() supplied
No results STEM() supplied
Copy Group STEM(stem) does
not include trailing "."
Explanation and Recommended Actions
The YKSUSPND command with the ATTIME parameter
specified was executed on a Cnt Ac-S Z copy group.
This parameter is invalid on Cnt Ac-S Z copy groups.
Re-execute the YKSUSPND command without specifying
the ATTIME parameter.
The PURGE and DEVN parameters cannot be specified
simultaneously for a Cnt Ac-J Z copy group.
The PURGE and VOLUNIT parameters cannot be
specified simultaneously for a Cnt Ac-J Z copy group.
The DRAIN parameter cannot be specified for a Cnt
Ac-J Z copy group.
The YKSUSPND command was executed on a Cnt Ac-J
Z copy group with the ATTIME parameter or CANCEL
parameter specified. These parameters are invalid on
Cnt Ac-J Z copy groups.
Re-execute the YKSUSPND command without specifying
the ATTIME or CANCEL parameter.
One or more devices in the HP XP 256 Disk Array
storage system do not support TCA copy groups.
Check that the command can be executed on this copy
group, and then re-execute the command.
The YKSUSPND command terminated with the return
code nnnn and the reason code rrrr.
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKV099I
message that will appear after this message. For reason
codes, see IKJPARS in the TSO/E Programming
Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a
period.
stem
Stem name assigned to the STEM
parameter
List of Messages 101