REP 10.4 Rear Cover Assembly
Parts List on
PL 14.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1.
Remove the Offset Catch Tray
(REP
2.
Remove the Exit Tray extension
(REP
3.
Remove the Exit Tray
(REP
10.3).
4.
Turn the Offset Catch Tray upside down.
5.
Remove the Lower Cover
(REP
10.5).
6.
Remove the Inner Exit Chute Assembly
7.
Release and remove the two Rear Cover Springs
8.
Remove the six screws that secure the Rear Cover
9.
Remove the Rear Cover.
Figure 1 Rear Cover Assembly
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
10.1).
10.2).
(REP
10.6).
(Figure
1).
(Figure
1).
REP 10.5 Lower Cover
Parts List on
PL 14.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the Offset Catch Tray
2.
Carefully turn the Offset Catch Tray upside down.
3.
Remove the six screws that secure the lower cover
4.
Remove the Lower Cover
Replacement
1.
Hold the Stack Height Sensor Actuator out as you reinstall the lower cover.
2.
Reinstall the components in the reverse order
02/2000
4-69
manuals4you.com
manuals4you.com
WARNING
(REP
10.1).
(Figure
1).
(Figure
1).
Figure 1 Lower Cover
REP 10.4, REP 10.5
Repair-Adjustment