Replacement
1.
Reinstall the components in the reverse order.
Repair-Adjustment
REP 9.2, REP 9.3
REP 9.3 Print Engine Controller PWB
Parts List on
PL 10.1
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1.
Remove the Left Interface Cover Assembly
2.
Remove the Left Cover
(REP
3.
Remove the Left Plate Assembly
4.
Disconnect P/J21, P/J22, P/J23, P/J25, P/J26, P/J27, P/J28, P/J29, P/J30, P/J31, P/J32,
P/J33, P/J34 and P/J35 from the Print Engine Controller PWB.
5.
Remove the four screws that secure the Print Engine Controller PWB to the printer.
Remove the Print Engine Controller PWB
Figure 1 Print Engine Controller PWB
02/2000
4-58
CAUTION
WARNING
(REP
1.1).
1.2).
(REP
1.11).
(Figure
1).
Initial Issue
DocuPrint N2125