Xerox N2125N - DocuPrint B/W Laser Printer Service Manual page 130

REP 4.4 Tray Bottom Assembly
Parts List on PL 4.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly (REP
4. Remove the Left Front Cover (REP 1.7).
5. Remove the MBF Chute Assembly (REP
6. Remove the MBF Feed Roll Assembly
7. Disconnect the hook that secures the Bottom Tray Assembly to the MBF Chute Assembly
(Figure 1).
8. Use a small screwdriver to carefully lift the locking tab and remove the Bottom Tray
Assembly (Figure 2).
9. Remove the right Exit Bearing (Figure
Figure 1 Bottom Tray Assembly Chute
Initial Issue
DocuPrint N2125
(REP 1.1).
1.6).
4.1).
(REP 4.2).
2).
Replacement
1. Reinstall the components in the reverse order.
NOTE: After replacing the tray bottom, ensure that the sleeves on the Tray Bottom fit over
the two posts on the MBF frame (see A,
02/2000
4-31
manuals4you.com manuals4you.com
Figure 2 Bottom Tray Assembly
Figure 1).
Repair-Adjustment
REP 4.4