A
•
Print Cartridge
(PL
8.1).
•
Fuser Assembly
(REP
6.2).
Replace the HVPS PWB Assembly
(REP
Status Indicator Repair Analysis Procedures
RAP 44 , RAP 45
9.6).
RAP 45 DIMM 1 (0101)
Procedure
Switch the printer power off. Remove the Left Interface Cover
installed in Slot 1 (slot 1 is the middle DIMM slot). Switch the printer power on. The
code reappears.
Y
N
Switch the printer power off. Install the removed DIMM in Slot 2 (bottom DIMM slot).
Switch the printer power on. The error code reappears.
Y
N
Switch the printer power off. Remove DIMM from Slot 2 (bottom DIMM slot) and
install the DIMM in slot 1 (middle DIMM slot). Switch the printer power on. The error
code reappears.
Y
N
Attribute the problem to a poor connection between the DIMM and the System
Controller PWB. Go to
Replace the System Controller PWB
Replace the DIMM installed in slot 2 with a new DIMM
Replace the System Controller PWB
02/2000
2-40
(REP
1.1). Remove the DIMM
Initial
Actions.
(REP
9.2).
(PL
10.1).
(REP
9.2).
DocuPrint N2125
error
Initial Issue