REP 4.10 Envelope Connector Assembly
Parts List on
PL 4.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1.
Remove Tray 1.
2.
Remove the Left Interface Cover Assembly
3.
Remove the Front Cover Assembly
(REP
4.
Remove the MBF Chute Assembly
(REP
5.
Remove the two screws that serve the Envelope Connector Assembly in the Chute
Assembly
(Figure
1).
6.
Slide the Envelope Connector Assembly and the Mounting to the left and remove
1).
7.
Remove the Envelope connector Assembly from the MBF Assembly.
Figure 1 Envelope Connector Assembly
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
(REP
1.1).
1.6).
4.1).
(Figure
manuals4you.com
manuals4you.com
02/2000
4-35
Repair-Adjustment
REP 4.10