Rep 3.10 Feeder Socket - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

Figure 1 Feeder PWB
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125

REP 3.10 Feeder Socket

Parts List on PL 3.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Left Cover
4. Remove the Front Cover Assembly
5. Remove the Left Front Cover
6. Remove the Left Plate Assembly
7. Remove the Plate Handle
8. Open Rear Door.
9. Remove the Top Cover Assembly
10. Remove the Right Cover
11. Remove the LVPS PWB
12. Remove the Paper Feeder
13. Remove the two screws that secure the Feeder Socket in the printer
NOTE: It may be necessary to use a scribe or small screwdriver to lift the locking tabs to
disconnect P/J671
14. Lift locking tabs and disconnect P/J671 from the Socket
02/2000
4-25
manuals4you.com manuals4you.com
WARNING
(REP 1.1).
(REP 1.2).
(REP 1.6).
(REP 1.7).
(REP 1.11).
(REP 1.12).
(REP 1.4).
(REP 1.5).
(REP 9.5).
(REP 3.1).
(Figure 1).
Figure 1 Feeder Socket
REP 3.9, REP 3.10
(Figure 1).
Repair-Adjustment