Xerox N2125N - DocuPrint B/W Laser Printer Service Manual page 144

REP 6.4 Exit Chute Assembly
Parts List on PL 7.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Front Cover Assembly (REP
4. Remove the Left Front Cover (REP 1.7).
5. Remove the Left Cover (REP 1.2).
6. Remove the Left Plate Assembly (REP
7. Remove the Top Cover Assembly (REP
8. Remove the Rear Cover Assembly (REP
9. Remove the Interlock Cover (REP 1.10).
10. Disconnect P/J31 and P/J32 from the Print Engine Controller PWB
11. Remove the four screws that secure the Exit Chute Assembly to the printer
12. Remove the Exit Chute Assembly (Figure
Figure 1 Exit Chute Harness Assembly
Initial Issue
DocuPrint N2125
(REP 1.1).
1.6).
1.11).
1.4).
1.8)
(Figure 1).
(Figure
2).
2).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-45
manuals4you.com manuals4you.com
Figure 2 Exit Chute Assembly
Repair-Adjustment
REP 6.4