Xerox N2125N - DocuPrint B/W Laser Printer Service Manual page 271

Drive transmission to the Drum and the BTR
The Main Motor Assembly transmits drive through the Drive Gear Assembly to the Drum drive
gear that is located on the end of the Drum. The Drum Gear drives the BTR Gear that is
located on the end of the BTR Assembly (Figure 6).
Figure 6 Drive transmission to the Drum and BTR
General Procedures / Information
GP 3.3
Drive transmission to the Fuser Assembly
As shown in Figure 7, the mechanical energy created by the Main Motor Assembly is transmit-
ted through the Drive Gear Assembly to the Idler Gear of the Fuser Assembly. The Idler Gear
transmits energy to the Heat Roll Gear located on the Heat Roll.
Figure 7 Drive transmission to the Fuser Assembly
02/2000
6-32
Initial Issue
DocuPrint N2125