RAP 46 DIMM 2 (0102)
Procedure
Switch the printer power off. Remove the Left Interface Cover
installed in Slot 2 (slot 2 is the bottom DIMM slot). Switch the printer power on. The
code reappears.
Y
N
Switch the printer power off. Install the removed DIMM in Slot 3 (top DIMM slot). Switch
the printer power on. The error code reappears.
Y
N
Switch the printer power off. Remove DIMM from Slot 3 (top DIMM slot) and install
the DIMM in slot 2 (bottom DIMM slot). Switch the printer power on. The error code
reappears.
Y
N
Attribute the problem to a poor connection between the DIMM and the System
Controller PWB. Go to
Initial
Replace the System Controller PWB
Replace the DIMM installed in slot 3 with a new DIMM
Replace the System Controller PWB
(REP
Initial Issue
DocuPrint N2125
(REP
1.1). Remove the DIMM
Actions.
(REP
9.2).
(PL
10.1).
9.2).
RAP 47 DIMM 3 (0103)
Procedure
Switch the printer power off. Remove the Left Interface Cover
error
installed in Slot 3 (slot 3 is the top DIMM slot). Switch the printer power on. The error code
reappears.
Y
N
Switch the printer power off. Install the removed DIMM in Slot 2 (bottom DIMM slot).
Switch the printer power on. The error code reappears.
Y
N
Switch the printer power off. Remove DIMM from Slot 2 (bottom DIMM slot) and
install the DIMM in slot 3 (top DIMM slot). Switch the printer power on. The
code reappears.
Y
N
Attribute the problem to a poor connection between the DIMM and the System
Controller PWB. Go to
Replace the System Controller PWB
Replace the DIMM installed in slot 2 with a new DIMM
Replace the System Controller PWB
02/2000
2-41
manuals4you.com
manuals4you.com
(REP
1.1). Remove the DIMM
Initial
Actions.
(REP
9.2).
(PL
10.1).
(REP
9.2).
Status Indicator Repair Analysis Procedures
RAP 46, RAP 47
error