Rep 2.3 Retard Spring - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

REP 2.3 Retard Spring

Parts List on PL 2.2
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Release the left and right latches of Tray 1
3. Open the Retard Chute (Figure 1).
4. Release the two Locking Tabs and lift the Retard Assembly
5. Remove the Retard Spring from the Roll Assembly
Figure 1 Retard Chute
Initial Issue
DocuPrint N2125
(Figure 1).
(Figure 2).
(Figure 2).
manuals4you.com manuals4you.com
Figure 2 Retard Spring
Replacement
1. Reinstall the components in the reverse order.
2. Ensure that the tab on the clutch is positioned on the pin on the Retard Shaft.
02/2000
4-15
Repair-Adjustment
REP 2.3