Rep 3.11 Size Sensor Housing - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 3.10, REP 3.11

REP 3.11 Size Sensor Housing

Parts List on PL 9.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover
3. Remove Left Cover (REP 1.2).
4. Remove the Front Cover Assembly
5. Remove the Left Front Cover Assembly
6. Remove Top Cover Assembly
7. Remove the Left Plate Assembly
8. Remove the Plate Handle (REP
9. Disconnect P/J33 from the Print Engine Controller PWB and remove cable from all cable
clamps (Figure 1).
10. Press the locking pin and slide the housing to the rear of the printer and remove
1).
Figure 1 Size Sensor Housing
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-26
WARNING
(REP 1.1).
(REP 1.6).
(REP 1.7).
(REP 1.4).
(REP 1.11).
1.12).
(Figure
Initial Issue
DocuPrint N2125