AUTOMATIC TRANSMISSION
23
Fault finding aid
Chart 42 : Gear changing thresholds delayed and warning
light illuminates.
(vehicles fitted with on-board computer)
If the XR25 gives no information on the nature of the origin of the fault, check that the
potentiometer wire is not incorrectly connected in place of the on-board computer wire.
Reconnect if necessary.
Chart 43 : Starting possible in N but not in P.
If the warning light is operational and it remains extinguished when there is a
fault, adjust the control following the Workshop Repair Manual for the vehicle.
After the operation, does the fault persist?
no
yes
Correct
Adjust again.
3DMXTT1.0
23-265