AUTOMATIC TRANSMISSION
Chart 14 : Slipping when changing gears in full load position
If the warning light is operational and it remains extinguished when
there is a fault, check the condition of the oil.
Is it dirty and does it smell?
(Check if it has already been changed
since the fault appeared).
Check the line pressure in 2nd gear hold, full load.
(Refer to MR T.A.M., pressure section).
yes
Replace the strainer.
Does the fault persist?
yes
Replace the hydraulic distributor.
After replacement, does the fault persist?
Fault finding aid
no
Is the value correct?
Adjust the pressure following the instructions in MR
T.A.M. After adjustment, does the fault persist?
no
yes
23-243
no
no
Correct
no
Repair the automatic transmission.
Replace it if necessary.
23
yes
yes
3DMXTT1.0