MJ automatic transmission
Removal
When the converter has been removed, remove
the seal (use a tool without any mould seams so
that the casing bore is not damaged).
Check the condition of the smooth part of the
stator shaft at (1).
Refitting
Lightly grease the new seal and fit it on the cham-
fer.
To position it, use tool B. Vi. 465, tapping lightly.
86136R
Refit the converter after having lubricated the
seal face
AUTOMATIC TRANSMISSION
Converter seal
ML automatic transmission
Removal
When the converter has been removed, remove
the seal using a chisel or an extracting tool.
Check the condition of the smooth part of the sta-
tor shaft (1).
Refitting
Oil the seal and push it fully on using tool B. Vi.
1402.
Refit the converter after lubricating the seal face.
23-51
23
88210R
11954R