Table of Contents
Advertisement
GEAR LEVER, HAND BRAKE
Selecting reverse gear
(vehicle in stationary condition)
Vehicles with manual gearbox : refer
to the grid on the gear lever knob 1 .
Pull the release knob A in upward
direction and then engage the
reverse gear.
Gear change indicators
Depending on the vehicle, to obtain
optimum consumption levels, an
indicator light on the instrument panel
lets you know the best time to move up
or down a gear.
Depending on the
gradient and/or vehicle
load, it may be
necessary when
stationary to apply the brake by at
least a further two notches and
engage a gear (1 or reverse
gear).
An impact to the
underside of the vehicle
while manoeuvring
(e.g. : striking a post,
raised kerb or other street
furniture) may result in damage to
the vehicle (e.g. : deformation of
an axle).To prevent any risk of
accident, have your vehicle
checked by an approved dealer.
Handbrake
To release
Firmly press and hold the brake
pedal.Pull lever 3 up slightly up, press
button 2 and then lower the lever to
the floor completely.
The red warning light on the
instrument panel will come on and a
sound if you are driving with an
incorrectly released handbrake.
To apply
Pull lever 3 fully upwards and make
sure the vehicle is immobilised.
3
D r i v i n g - 5 9
Advertisement
Table of Contents
