Chart 50: Banging When Changing Gears - Renault Clio Workshop Repair Manual

AUTOMATIC TRANSMISSION
23
Fault finding aid
Chart 50 : Banging when changing gears.
If the warning light is operational and it remains extinguished when there is a fault,
check the conformity of the dipstick on the table in MR T.A.M.
Replace the dipstick if it is incorrect.
Check the oil level and top it up if necessary.
After checking / replacing the dipstick and topping up the level, does the fault persist?
yes
Connect pressure gauge BVI 466-07 and measure the line pressure in 2nd gear hold and full
load.
Adjust the pressure if necessary.
(Refer to MR T.A.M., identification and pressure section).
no
Correct
3DMXTT1.0
23-269