Fiche n 26
11
12
13
17
20
N N N N O O O O T T T T E E E E : : : :
To determine faults, refer to the "Fault finding charts to be used from the bargraphs" section.
AUTOMATIC TRANSMISSION
Meaning of the bargraphs
Illuminated when the gear selector lever is in the P or N position. Starting is
authorised.
Illuminated when the engine is stopped. If the bargraph is illuminated when the
engine is running, this means that the engine speed information is faulty or
absent.
Illuminated when the air conditioning compressor clutch feed cut-off is active.
- The LH bargraph represents the electrical feed of solenoid valve N 1.
- The RH bargraph represents the electrical feed of solenoid valve N 2.
When the vehicle is stationary and regardless of the position of the gear lever,
only the RH bargraph should be illuminated.
When in 1st or reverse gear, only the RH bargraph should be illuminated.
When in 2nd gear, the RH and LH bargraphs should be illuminated.
When in 3rd gear, no bargraphs should be illuminated.
Illuminated when using the memory of the XR25.
23-199
23