Speedometer Drive Pinion (Mb); 1St - Only The Speedometer Drive Pinion Or Shaft Is Damaged; 2Nd - The Speedometer Drive Pinion And Wheel Are Damaged - Renault Clio Workshop Repair Manual

R R R R E E E E P P P P L L L L A A A A C C C C I I I I N N N N G G G G
st
1 C C C C A A A A S S S S E E E E : : : : Only the speedometer drive pinion or
shaft is damaged.
The automatic transmission must be removed but
the final drive assembly does not have the be dis-
mantled. Process as follows:
From the differential, remove:
- the circlip (22) and the washer (21),
- the sunwheel (20).
Pull the speedometer drive shaft using a pair of
flat-nose pliers.
Rotate the differential until the speedometer
drive pinion can be seen inside it.
AUTOMATIC TRANSMISSION

Speedometer drive pinion (MB)

86528R
88577S
Loosen the pinion with a screwdriver and recover
it.
Fit the new speedometer drive pinion using a pair
of flat-nose pliers.
The pinion and its drive shaft can be refitted by
hand. The drive shaft must be correctly positioned
in relation to the pinion key notches due to the re-
silience of the lips of the shaft.
Use a mallet to ensure that it is properly clipped in
place.
Reposition the drive shaft (19) in the differential
and refit:
- the sunwheel (20),
- the washer (21) (make sure that the notch is in
the correct position) and its circlip (22).
Refit the automatic transmission
nd
2 C C C C A A A A S S S S E E E E : : : : The speedometer drive pinion and
wheel are damaged.
The automatic transmission does not have to be
removed and the final drive does not have to be
dismantled.
23-39
23
86053S