-
the inspection cover (40) and its seal (42), take
care not to lose spacers (41), depending on
version.
Break off notches (A) on (12) and recover them.
Pull on the speedometer driveshaft (13).
Move the step-down drive (9) back so as to release
the half-clip (10), then remove it.
Push the speedometer drive gear (11) back to-
wards the converter.
Open the spring ring (15) and simultaneously ex-
tract shaft (39) with bearing (7).
Recover the speedometer drive wheel (11) and the
drive pinion (9).
AUTOMATIC TRANSMISSION
Final drive assembly (MJ)
85851R1
Extract the bearing (7) and the washer (8) from
(39).
Lock the final drive pinion (20) using tool B. Vi.
953 on the pinion (19).
Unlock nut (16) and remove it.
Remove the tool and knock out the output shaft
(20) using a mallet, recover bearing (17), spacer
(18) and drive pinion (19).
23-87
23
85851R6
86138R