Creating A Switch Peer Group (Spg) On Mobility Controller 5760 Example - Cisco Unified Access CT5760 Deployment Manual

Configuration Examples
Saving Config—Once client verification is done, save the configuration by selecting Save
Step 22
Configuration in the upper right hand side of the screen.

Creating a Switch Peer Group (SPG) on Mobility Controller 5760 Example

In this section, you will be able to configure Switch Peer Group (SPG) and add members (Mobility
Agent) to the Group on the Mobility Controller (MC).
On the 5760 controller GUI, navigate to Configuration > Controller > Mobility Management
Step 23
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
20
Confirmation message appears. Click OK.