Chapter 2 Adding A Wlc526 Controller And Lap521; Access Points; Obtaining And Installing Cca; Starting Cca - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Adding a WLC526 Controller and LAP521

Access Points

This chapter provides instructions on adding a WLC526 controller and controller-based LAP521 access
points to your network using CCA. These sections are provided in this chapter:
•
•
•
•
•

Obtaining and Installing CCA

If you have not already installed CCA, go to the following Cisco.com URL, click Download Software
and follow the instructions:
http://www.cisco.com/en/US/products/ps7287/index.html
For CCA installation instructions, refer to Getting Started with Cisco Configuration Assistant 1.5:
http://www.cisco.com/en/US/products/ps7287/prod_installation_guides_list.html

Starting CCA

Double-click the CCA icon on your desktop to start the application and the CCA window appears (see
Figure
OL-15283-01
Obtaining and Installing CCA, page 2-1
Starting CCA, page 2-1
Adding a New Controller, page 2-2
Verifying and Configuring Your Ethernet Adapter, page 2-9
Adding LAP521 Access Points, page 2-11
2-1).
C H A P T E R
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
2
2-1